Toyota
Jeep Cherokee
 Owners Manual
Understanding the features of your vehicle » Lights
Automatic High Beam Headlamp Control - If Equipped

The Automatic High Beam Headlamp Control system provides increased forward lighting at night by automating high beam control through the use of a digital camera mounted on the inside rearview mirror. This camera detects vehicle specific light and automatically switches from high beams to low beams until the approaching vehicle is out of view.

NOTE:

  • The Automatic High Beam Headlamp Control can be turned on or off using the Uconnect System. Refer to "Uconnect Settings" in "Understanding Your Instrument Panel" for further information.
  • Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions on the windshield or camera lens will cause the system to function improperly.
  • To opt out of the Advanced Auto High-Beam Sensitivity Control (default) and enter Reduced High-Beam Sensitivity Control (not recommended), toggle highbeam lever 6 full on/off cycles within 10 seconds of ignition ON. System will return to default setting upon ignition off.
    More about «Lights»:

    Headlight Switch

    Automatic Headlights - If Equipped

    Headlights On With Wipers (Available With Automatic Headlights Only)

    Headlight Time Delay

    Automatic High Beam Headlamp Control - If Equipped

    Daytime Running Lights (DRL) - If Equipped

    Fog Lights - If Equipped

    Turn Signals

    Front Map/Reading Lights

    Interior Lights

    Jeep Cherokee Owners Manual / Understanding the features of your vehicle / Lights / Automatic High Beam Headlamp Control - If Equipped

    Jeep Cherokee Owners Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com