Jeep Cherokee
 Service Manual
Transmission and transfer case » AX5 manual transmission » Description and operation
AX5 manual transmission


The AX5 is a five speed manual transmission with fifth gear being the overdrive range. An adapter housing is used to attach the transmission to the transfer case on 4-wheel drive applications. A standard style extension housing is used for the 2-wheel drive applications.

The shift mechanism is integral to the transmission assembly and mounted in the shift tower portion of the adapter/extension housing (Fig. 1).


Gear ratios for the AX5 manual transmission are as follows:

  •  First gear: 3.93:1
  •  Second gear: 2.33:1
  •  Third gear: 1.45:1
  •  Fourth gear: 1.00:1
  •  Fifth gear: 0.85:1
  •  Reverse gear: 4.74:1


The AX5 identification code is on the bottom surface of the transmission case near the fill plug (Fig.

2). The first number is year of manufacture. The second and third numbers indicate month of manufacture.

The next series of numbers is the transmission serial number.


The manual transmission receives power through the clutch assembly from the engine. The clutch disc is splined to the transmission input shaft and is turned at engine speed at all times that the clutch is engaged. The input shaft is connected to the transmission countershaft through the mesh of fourth speed gear on the input shaft and the fourth countershaft gear. At this point, all the transmission gears are spinning.

Fig. 1 AX5 Manual Transmission
Fig. 1 AX5 Manual Transmission

Fig. 2 Transmission Identification
Fig. 2 Transmission Identification


The driver selects a particular gear by moving the shift lever to the desired gear position. This movement moves the internal transmission shift components to begin the shift sequence. As the shift lever moves the selected shift rail, the shift fork attached to that rail begins to move. The fork is positioned in a groove in the outer circumference of the synchronizer sleeve. As the shift fork moves the synchronizer sleeve, the synchronizer begins to speed-up or slow down the selected gear (depending on whether we are up-shifting or down-shifting). The synchronizer does this by having the synchronizer hub splined to the mainshaft, or the countershaft in some cases, and moving the blocker ring into contact with the gear's friction cone. As the blocker ring and friction cone come together, the gear speed is brought up or down to the speed of the synchronizer. As the two speeds match, the splines on the inside of the synchronizer sleeve become aligned with the teeth on the blocker ring and the friction cone and eventually will slide over the teeth, locking the gear to the mainshaft, or countershaft, through the synchronizer.

    More about «Description and operation»:

    AX5 manual transmission


    Jeep Cherokee Service Manual / Transmission and transfer case / AX5 manual transmission / Description and operation / AX5 manual transmission

    Jeep Cherokee Service Manual


    © 2017-2022 Copyright