Toyota
Jeep Cherokee
 Service Manual
Lamps » Lamp service
Back-up/brake/rear turn signal/tail lamp

REMOVAL

(1) Open the liftgate.

(2) Remove the bolts attaching the tail lamp housing to the quarter panel (Fig. 6).

(3) Grasp the lamp and pull to disengage it from the grommet at the base of the lamp.

(4) Rotate the bulb sockets one-third turn and remove the bulb sockets from the lamp housing.

Fig. 6 Tail Lamp
Fig. 6 Tail Lamp

1 - TAIL LAMP
2 - REAR BUMPER
3 - GROMMET

INSTALLATION

(1) Install the bulb and sockets in the lamp housing.

(2) Position the lamp housing in the quarter panel and push to engage the grommet.

(3) Install the lamp housing screws. Tighten the screws securely.

(4) Install the bolts attaching the tail lamp housing to the quarter panel.

(5) Close the liftgate.

    More about «Lamp service»:

    Headlamp

    Fog lamp

    Front park/turn signal lamp

    Side marker lamp

    Back-up/brake/rear turn signal/tail lamp

    Center high mounted stop lamp (CHMSL)

    License plate lamp

    Underhood lamp

    Cargo lamp

    Map/reading lamp

    Visor vanity lamp

    Jeep Cherokee Service Manual / Lamps / Lamp service / Back-up/brake/rear turn signal/tail lamp

    Jeep Cherokee Service Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com