Jeep Cherokee
Service Manual
Charging system » Removal and installation
Battery temperature sensor

The battery temperature sensor is located under vehicle battery (Fig. 5) and is attached to a mounting hole on battery tray.

Fig. 5 Battery Temperature Sensor

1 - BATTERY TEMPERATURE SENSOR
2 - BATTERY TRAY

REMOVAL

(1) Remove battery. Refer to Group 8A, Battery for procedures.

(2) Disconnect sensor pigtail harness from engine wire harness.

(3) Pry sensor straight up from battery tray mounting hole.

INSTALLATION

(1) Feed pigtail harness through hole in top of battery tray and press sensor into top of battery tray.

(2) Connect pigtail harness.

(3) Install battery. Refer to Group 8A, Battery for procedures.

More about «Removal and installation»:

Generator