Jeep Cherokee

 Owners Manual

Maintaining your vehicle » Bulb replacement
Bodyside Mounted Back-up Lamp

1. Open the liftgate.

2. Remove the screws that fasten the tail lamp housing to the vehicle.

3. Grasp the tail lamp and pull firmly rearward to disengage the lamp from the vehicle.

4. Disconnect the electrical connector.

5. Twist the socket counterclockwise and remove from housing.

6. Pull the bulb to remove it from the socket.

7. Replace the bulb and install the socket.

8. Reconnect the electrical connector.

9. Reinstall the tail lamp housing and screws.

10. Close the liftgate.

Low Beam And High Beam Headlamps

Front Turn Signals And Front Side Marker Lamps

Front Fog Lamp

Front Fog Lamp (Trailhawk)

Bodyside Mounted Back-up Lamp

Liftgate Mounted Back-up Lamp