Jeep Cherokee Service ManualBrakes » Base brake system » Adjustments
Brake lamp switch
Jeep Cherokee
Service Manual
Brake lamp switch
(1) Press and hold brake pedal in applied position.
(2) Pull switch plunger all the way out to fully extended position.
(3) Release brake pedal. Then pull pedal lightly rearward. Pedal will set plunger to correct position as pedal pushes plunger into switch body. Switch will make ratcheting sound as it self adjusts.
CAUTION: Booster damage may occur if the pedal pull exceeds 20 lbs..
More about «Adjustments»:
Brake lamp switch
Rear drum brake
Parking brake cable tensioner
Jeep Cherokee Service Manual
- Lubrication and maintenance
- Suspension
- Differential and driveline
- Brakes
- Clutch
- Cooling system
- Battery
- Starting systems
- Charging system
- Ignition system
- Instrument panel systems
- Audio systems
- Horn systems
- Speed control system
- Turn signal and hazard warning systems
- Wiper and washer systems
- Lamps
- Passive restraint systems
- Electrically heated systems
- Power distribution systems
- Power lock systems
- Vehicle theft/security systems
- Power seat systems
- Power window systems
- Power mirror systems
- Chime/buzzer warning systems
- Overhead console systems
- Engine
- Exhaust system
- Frame and bumpers
- Frame
- Fuel system
Categories
© 2017-2023 Copyright www.jcherokee.com