Toyota
Jeep Cherokee
 Service Manual
Body » Seats » Removal and installation
Bucket seat cushion cover

REMOVAL

(1) Remove seat from vehicle.

(2) Remove side shield trim cover.

(3) Remove seatback.

(4) With the cushion side down, disengage the forward, rearward and inboard J-straps.

(5) Disengage the clips attaching the outboard side of the cover to the cushion frame.

(6) Turn the cushion over and roll the cover off the cushion.

(7) Disengage the electrical connectors for the heated seat, if equipped.

(8) Remove the hog rings attaching the cover to the cushion support wires (Fig. 12).

(9) Separate the cover from the cushion.

INSTALLATION

(1) Position the cover on the cushion.

(2) Engage the electrical connectors for the heated seat, if equipped.

(3) Install the hog rings attaching the cover to the cushion support wires.

Fig. 12 Seat Cushion Cover Hog Rings
Fig. 12 Seat Cushion Cover Hog Rings

1 - SEAT CUSHION COVER
2 - SEAT CUSHION
3 - HOG RING

(4) With the cushion side down, engage the forward, rearward and inboard J-straps.

(5) Engage the clips attaching the outboard side of the cover to the cushion frame.

(6) Install seatback.

(7) Install side shield trim cover.

(8) Install seat.

    More about «Removal and installation»:

    Head restraint sleeve

    Head restraint cover

    Bucket seat

    Bucket seat track

    Bucket seatback cover

    Bucket seatback

    Bucket seat cushion cover

    Bucket seat recliner

    Rear seat cushion

    Rear seatback

    Rear seat cushion cover

    Rear seatback latch striker and bumper

    Rear seatback cover

    Jeep Cherokee Service Manual / Body / Seats / Removal and installation / Bucket seat cushion cover

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com