Jeep Cherokee
Service Manual
Lamps » Lamp service
Cargo lamp

REMOVAL

(1) Insert a small flat blade into the access slots (Fig. 9).

(2) Carefully pry the lens from the lamp.

(3) Disengage the lens mounting tabs from the lamp mounting pins (Fig. 10).

(4) Remove the fasteners attaching the lamp to the roof.

(5) Remove the lamp housing from the headliner cavity.

(6) Disconnect the wire harness connector.

INSTALLATION

(1) Position the dome lamp housing at the headliner cavity.

(2) Connect the wire harness connector.

(3) Install the fasteners attaching the lamp to the roof.

(4) Position the lens at the lamp housing and force it upward into the housing until the mounting tabs are seated on the lamp mounting pins.

Fig. 9 Cargo Lamp

1 - HOUSING
2 - SCREWDRIVER SLOTS
3 - CARGO LAMP
4 - LENS

Fig. 10 Cargo Lamp Lens

1 - MOUNTING PIN ON UNDERSIDE
2 - BULB
3 - MOUNTING PIN
4 - MOUNTING TAB
5 - TAB "A"
6 - MOUNTING TAB
7 - SLOT "B"

More about «Lamp service»:

Headlamp