Toyota
Jeep Cherokee
 Owners Manual
Maintaining your vehicle » Maintenance procedures » Engine Oil
Change Engine Oil

The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance.

Refer to the "Maintenance Schedule" for further information.

NOTE: Under no circumstances should oil change intervals exceed 10,000 miles (16,000 km), twelve months or 350 hours of engine run time, whichever comes first. The 350 hours of engine run or idle time is generally only a concern for fleet customers.

Engine Oil Selection

For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends engine oils that are API Certified and meet the requirements of FCA US Material Standard MS-6395.

American Petroleum Institute (API) Engine Oil Identification Symbol

This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils.

This symbol certifies 0W-20, 5W- 20, 0W-30, 5W-30 and 10W-30 engine oils.

CAUTION!

Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty.

    More about «Engine Oil»:

    Checking Oil Level

    Change Engine Oil

    Engine Oil Viscosity (SAE Grade) - 2.0L, 2.4L Engine

    Engine Oil Viscosity (SAE Grade) - 3.2L Engine

    Synthetic Engine Oils

    Jeep Cherokee Owners Manual / Maintaining your vehicle / Maintenance procedures / Engine Oil / Change Engine Oil

    Jeep Cherokee Owners Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com