Jeep Cherokee Service ManualClutch » Removal and installation
Clutch housing
Jeep Cherokee
Service Manual
Clutch housing
The clutch housing is removable and can be replaced when the transmission is out of the vehicle.
The bolts attaching the housing to the transmission case are located inside the housing (Fig. 14).
Recommended tightening torque for the clutch housing- to-transmission bolts is 46 N·m (34 ft. lbs.).
NOTE: Be sure the transmission and housing mating surfaces are clean before installing an original, or replacement clutch housing. Dirt/foreign material trapped between the housing and transmission will cause misalignment. If misalignment is severe enough, the result will be clutch drag, incomplete release and hard shifting.
More about «Removal and installation»:
Clutch cover and disc
Release bearing
Pilot bearing
Clutch housing
Clutch hydraulic linkage
Jeep Cherokee Service Manual
- Lubrication and maintenance
- Suspension
- Differential and driveline
- Brakes
- Clutch
- Cooling system
- Battery
- Starting systems
- Charging system
- Ignition system
- Instrument panel systems
- Audio systems
- Horn systems
- Speed control system
- Turn signal and hazard warning systems
- Wiper and washer systems
- Lamps
- Passive restraint systems
- Electrically heated systems
- Power distribution systems
- Power lock systems
- Vehicle theft/security systems
- Power seat systems
- Power window systems
- Power mirror systems
- Chime/buzzer warning systems
- Overhead console systems
- Engine
- Exhaust system
- Frame and bumpers
- Frame
- Fuel system
- Steering
- Transmission and transfer case
- Tires and wheels
- Body
Categories
© 2017-2024 Copyright www.jcherokee.com