Refer to the "Maintenance Schedule" for the proper maintenance intervals.
NOTE: Be sure to follow the "Sever Duty Conditions" maintenance interval if applicable.
WARNING!
The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
Engine Air Cleaner Filter Selection
The quality of replacement engine air cleaner filters varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR engine air cleaner filters are a high quality filter and are recommended.
Engine Air Cleaner Filter Inspection and Replacement
Inspect engine air cleaner filter for dirt and or debris, if you find evidence of either dirt or debris you should change your air cleaner filter.
Engine Air Cleaner Filter Removal
1. Remove the screws from the air cleaner cover.
Air Cleaner Filter Cover
1 - Clean Air Hose Clamp
2 - Air Hose (If Equipped)
3 - Screws
2. Push in on the quick connect clip with your thumb and remove by pulling hose (If Equipped) away from air cleaner filter cover.
Air Cleaner Air Hose - If Equipped
1 - Air Filter Cleaner Cover
2 - Air Hose (If Equipped)
3 - Quick Connect Clip
3. Lift the air cleaner cover to access the air cleaner filter.
<>
Open Air Cleaner Filter Assembly
1 - Air Cleaner Cover
2 - Air Cleaner Filter
4. Remove the air cleaner filter element from the housing assembly.
<>
Air Cleaner Filter
1 - Air Cleaner Filter
2 - Air Cleaner Filter Inspection Surface
Engine Air Cleaner Filter Installation
NOTE: Inspect and clean the housing if dirt or debris is present before replacing the air filter element.
1. Install the air cleaner filter element into the housing assembly with the air cleaner filter inspection surface facing downward.
2. Install the air cleaner cover onto the housing assembly locating tabs.
3. Install screws to secure the air cleaner cover to the housing assembly and install air hose (if equipped).