Toyota
Jeep Cherokee
 Service Manual
Transmission and transfer case » AX5 manual transmission » Removal and installation
Front bearing retainer seal

REMOVAL

(1) Remove release bearing and lever from the transmission.

(2) Remove the bolts holding the front bearing retainer to the transmission case.

(3) Remove the front bearing retainer from the transmission case.

(4) Using a suitable pry tool, remove the front bearing retainer seal.

INSTALLATION

(1) Using Tool Handle C-4171 and Seal Installer 8211, install new seal in to the front bearing retainer (Fig. 10).

Fig. 10 Install Front Bearing Retainer Seal
Fig. 10 Install Front Bearing Retainer Seal

1 - SPECIAL TOOL C-4171
2 - SPECIAL TOOL 8211 (AX5) OR 8209 (AX15)

(2) Remove any residual gasket material from the sealing surfaces of the bearing retainer and the transmission case.

(3) Install new front bearing retainer gasket to the front bearing retainer.

(4) Install the front bearing retainer onto the transmission case.

(5) Install the bolts to hold the bearing retainer onto the transmission case.

(6) Tighten the bolts to 17 N·m (12 ft. lbs.).

(7) Install release bearing and lever onto the transmission.

    More about «Removal and installation»:

    Transmission

    Front bearing retainer seal

    Extension housing seal

    Adapter housing seal

    Jeep Cherokee Service Manual / Transmission and transfer case / AX5 manual transmission / Removal and installation / Front bearing retainer seal

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com