Toyota
Jeep Cherokee
 Service Manual
Frame and bumpers » Bumpers
Front tow hook

REMOVAL

(1) Remove bolts attaching tow hook to tow hook reinforcement (Fig. 4).

(2) Separate tow hook from reinforcement.

Fig. 3 Vacuum Reservoir
Fig. 3 Vacuum Reservoir

1 - VACUUM LINE
2 - RESERVOIR SCREWS
3 - VACUUM RESERVOIR

(3) If necessary, remove bolt attaching tow hook reinforcement to frame.

Fig. 4 Front Tow Hook
Fig. 4 Front Tow Hook

1 - MOUNTING BRACKET
2 - TOW HOOK
3 - TOW HOOK REINFORCEMENT

INSTALLATION

(1) If removed, install bolt attaching tow hook reinforcement to frame. Tighten bolt to 30 N·m (22 ft.

lbs.) torque.

(2) Position tow hook on reinforcement.

(3) Install bolts attaching tow hook to tow hook reinforcement. Tighten bolts to 100 N·m (74 ft. lbs.) torque.

    More about «Bumpers»:

    Front bumper end cap

    Front bumper

    Front tow hook

    Rear bumper end cap

    Rear bumper

    Rear tow hook

    Jeep Cherokee Service Manual / Frame and bumpers / Bumpers / Front tow hook

    Jeep Cherokee Service Manual

    Categories


    © 2017-2023 Copyright www.jcherokee.com