Jeep Cherokee

 Owners Manual

Maintaining your vehicle » Maintenance procedures » Windshield Wiper Blades
Front Wiper Blade Removal/Installation

CAUTION!

Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged.

1. Lift the wiper arm to raise the wiper blade off of the glass, until the wiper arm is in the full up position.

<>
 Wiper Blade With Release Tab In Locked Position

1 - Wiper

2 - Release Tab

3 - Wiper Arm

2. To disengage the wiper blade from the wiper arm, flip up the release tab on the wiper blade and while holding the wiper arm with one hand, slide the wiper blade down towards the base of the wiper arm.

<>
 Wiper Blade With Release Tab In Unlocked Position

1 - Wiper Blade

2 - Release Tab

3 - Wiper Arm

3. With the wiper blade disengaged, remove the wiper blade from the wiper arm by holding the wiper arm with one hand and separating the wiper blade from the wiper arm with the other hand (move the wiper blade toward the right side of the vehicle to separate the wiper blade from the wiper arm).

Wiper Blade Removed From Wiper Arm

1 - Wiper Blade

2 - Wiper Arm

3 - Release Tab

4. Gently lower the wiper arm onto the glass.

Front Wiper Blade Removal/Installation

Installing The Front Wipers

Rear Wiper Blade Removal/Installation

Installing The Rear Wiper