Toyota
Jeep Cherokee
 Service Manual
Lamps » Lamp service
Headlamp

REMOVAL

(1) Remove the screws attaching the bezel to the grille opening panel (2) Remove the screws attaching the retaining ring to the headlamp bucket.

(3) Disconnect the headlamp bulb wire harness connector (Fig. 1).

(4) Separate the bulb from the vehicle.

(5) Remove the spring attaching the headlamp bucket to the grille opening panel (Fig. 2).

(6) Slide the headlamp bucket downward to disengage it from the headlamp adjusting screws.

Fig. 1 Headlamp Connector
Fig. 1 Headlamp Connector

1 - HEADLAMP CONNECTOR
2 - PARK/TURN LAMP BULB
3 - SIDE MARKER LAMP BULB

Fig. 2 Headlamp
Fig. 2 Headlamp

1 - HEADLAMP ADJUSTMENT
2 - NUT
3 - HEADLAMP
4 - BEZEL
5 - PARK/TURN LAMP
6 - SPRING
7 - BUMPER

INSTALLATION

(1) Position the headlamp bucket in the grille opening panel and slide the headlamp bucket upward to engage it with the headlamp adjusting screws.

(2) Install the spring attaching the headlamp bucket to the grille opening panel.

(3) Connect the wire harness connector.

(4) Position the bulb in the bucket.

(5) Position retaining ring on the headlamp bulb and install screws.

(6) Install the headlamp bezel.

    More about «Lamp service»:

    Headlamp

    Fog lamp

    Front park/turn signal lamp

    Side marker lamp

    Back-up/brake/rear turn signal/tail lamp

    Center high mounted stop lamp (CHMSL)

    License plate lamp

    Underhood lamp

    Cargo lamp

    Map/reading lamp

    Visor vanity lamp

    Jeep Cherokee Service Manual / Lamps / Lamp service / Headlamp

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com