Toyota
Jeep Cherokee
 Service Manual
Lamps » Lamp bulb service
Headlamp bulb

REMOVAL

(1) Remove the screws attaching the bezel to the grille opening panel (Fig. 1).

(2) Remove screws attaching the retaining ring to the headlamp canister.

(3) Disconnect the headlamp bulb wire harness connector.

(4) Separate the sealed beam from the vehicle.

Fig. 1 Headlamp Bezel
Fig. 1 Headlamp Bezel

1 - HEADLAMP ADJUSTMENT
2 - NUT
3 - HEADLAMP
4 - BEZEL
5 - PARK/TURN LAMP
6 - SPRING
7 - BUMPER

INSTALLATION

(1) Connect wire harness connector.

(2) Position bulb in canister.

(3) Position retaining ring on sealed beam and install screws.

(4) Install headlamp bezel.

    More about «Lamp bulb service»:

    Headlamp bulb

    Fog lamp bulb

    Front park/turn signal lamp bulb

    Side marker lamp bulb

    Back-up/brake/rear turn signal/tail lamp bulb

    License plate lamp bulb

    Center high mounted stop lamp (chmsl) bulb

    Underhood lamp bulb

    Cargo lamp bulb

    Map reading lamp bulb

    Visor vanity lamp bulb

    Jeep Cherokee Service Manual / Lamps / Lamp bulb service / Headlamp bulb

    Jeep Cherokee Service Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com