Toyota
Jeep Cherokee
 Service Manual
Electrically heated systems » Heated seat system » Description and operation
Heated seat element and sensor

Two heated seat heating elements are used in each front seat, one for the seat cushion and the other for the seat back. The two elements for each seat are connected in series with the SHIM.

The temperature sensor is a Negative Temperature Coefficient (NTC) thermistor. One temperature sensor is used for each seat, and it is integral to the seat cushion heating element.

The heating elements are sewn into the seat cushion cover and seat back cover assemblies, which are serviced individually. The heating elements and temperature sensor cannot be repaired and, if faulty or damaged, the affected seat cover assembly must be replaced. Refer to Group 23 - Body for the seat cushion cover and seat back cover Removal and Installation.

    More about «Description and operation»:

    Heated seat switch

    Seat heat interface module

    Heated seat element and sensor

    Jeep Cherokee Service Manual / Electrically heated systems / Heated seat system / Description and operation / Heated seat element and sensor

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com