Toyota
Jeep Cherokee
 Service Manual
Suspension » Front suspension » Description and operation
Hub/bearing

DESCRIPTION

The bearing used on the front hub of this vehicle is the combined hub and bearing unit type assembly.

This unit assembly combines the front wheel mounting hub (flange) and the front wheel bearing into a one piece unit. The wheel mounting studs are the only replaceable component of the hub/bearing assembly.

OPERATION

The hub/bearing assembly is mounted to the steering knuckle and is retained by three mounting bolts accessible from the back of the steering knuckle. The hub/bearing unit is not serviceable and must be replaced as an assembly if the bearing or the hub is determined to be defective.

    More about «Description and operation»:

    Suspension components

    Shock absorbers

    Jounce bumper

    Coil springs and isolators

    Lower suspension arms and bushings

    Upper suspension arms and bushings

    Stabilizer bar

    Track bar

    Hub/bearing

    Jeep Cherokee Service Manual / Suspension / Front suspension / Description and operation / Hub/bearing

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com