Jeep Cherokee

 Owners Manual

Things to know before starting your vehicle » Occupant restraint systems » Seat Belt Systems
Lap/Shoulder Belt Untwisting Procedure

Use the following procedure to untwist a twisted lap/ shoulder belt.

1. Position the latch plate as close as possible to the anchor point.

2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the seat belt webbing 180 degrees to create a fold that begins immediately above the latch plate.

3. Slide the latch plate upward over the folded webbing.

The folded webbing must enter the slot at the top of the latch plate.

4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no longer twisted.

Initial Indication

Change Of Status

Lap/Shoulder Belts

Lap/Shoulder Belt Operating Instructions

Lap/Shoulder Belt Untwisting Procedure

Adjustable Upper Shoulder Belt Anchorage

Seat Belt Extender

Seat Belts And Pregnant Women

Seat Belt Pretensioner

Switchable Automatic Locking Retractor (ALR)

How To Disengage The Automatic Locking Mode