Toyota
Jeep Cherokee
 Service Manual
Suspension » Front suspension » Removal and installation
Lower suspension ARM

REMOVAL

  1.  Raise and support the vehicle.
  2.  Remove the lower suspension arm nut and bolt from the axle bracket.
  3.  Remove the nut and bolt from the rear bracket and remove the lower suspension arm (Fig. 3).

INSTALLATION

  1.  Position the lower suspension arm at the axle bracket and rear bracket.
  2.  Install the bolts and finger tighten the nuts.
  3.  Remove support and lower the vehicle.
  4.  Tighten the front and rear nuts to 115 N·m (85 ft. lbs.).

Upper and Lower Suspension Arms
Fig. 3 Upper and Lower Suspension Arms

1 - BOLT
2 - UPPER ARM
3 - NUT
4 - BOLT
5 - NUT
6 - FRAME RAIL
7 - LOWER ARM
8 - NUT
9 - BOLT
10 - NUT

    More about «Removal and installation»:

    Shock absorber

    Coil spring/jounce bumper

    Lower suspension ARM

    Upper suspension ARM

    Front axle bushing

    Stabilizer bar

    Track bar

    Hub bearing

    Wheel mounting studs

    Jeep Cherokee Service Manual / Suspension / Front suspension / Removal and installation / Lower suspension ARM

    Jeep Cherokee Service Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com