Toyota
Jeep Cherokee
 Service Manual
Power lock systems » Description and operation
Power lock switch

The power locks are controlled by a two-way switch that is integral to the Driver Door Module (DDM) and the Passenger Door Module (PDM) mounted in the trim panel of its respective front door. Each switch is illuminated by a light-emitting diode when the ignition switch is turned to the On position. The power lock switches provide a hard-wired lock or unlock signal to the power lock system control circuitry, which is located in the PDM.

The power lock switches and their lamps cannot be repaired. If the switches are damaged or faulty, the entire PDM or DDM unit must be replaced.

    More about «Description and operation»:

    Power lock switch

    Door module

    Power lock motor

    Remote keyless entry transmitter

    Remote keyless entry receiver

    Jeep Cherokee Service Manual / Power lock systems / Description and operation / Power lock switch

    Jeep Cherokee Service Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com