Toyota
Jeep Cherokee
 Owners Manual
Understanding the features of your vehicle » Driver memory seat - if equipped
Programming The Memory Feature

To create a new memory profile, perform the following:

NOTE: Saving a new memory profile will erase an existing profile from memory.

1. Cycle the vehicle's ignition to the ON position.

2. Adjust all memory profile settings to desired preferences (i.e., seat, side mirror and radio station presets).

3. Push and release the SET button on the memory switch, then push the number (1) button within five seconds. The Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID), will display which memory position is being set.

If desired, a second memory profile can be stored into memory as follows: 1. Cycle the vehicle's ignition to the ON position.

2. Adjust all memory profile settings to desired preferences (i.e., seat, side mirror and radio station presets).

3. Push and release the SET button on the memory switch, then push the number (2) button within five seconds. The EVIC/DID will display which memory position is being set.

NOTE:

  • Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a memory profile.
  • To set a memory profile to your RKE transmitter, refer to "Linking And Unlinking The Remote Keyless Entry Transmitter To Memory" in this section.
    More about «Driver memory seat - if equipped»:

    Programming The Memory Feature

    Linking And Unlinking The Remote Keyless Entry Transmitter To Memory

    Memory Position Recall

    Easy Entry/Exit Seat

    Jeep Cherokee Owners Manual / Understanding the features of your vehicle / Driver memory seat - if equipped / Programming The Memory Feature

    Jeep Cherokee Owners Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com