Toyota
Jeep Cherokee
 Service Manual
Differential and driveline » Propeller shafts » Adjustments
Rear axle pinion input angle

Adjust the rear axle pinion input angle on vehicles equipped with leaf springs with tapered shims (Fig.

37). Install tapered shims between the springs and axle pad to correct the angle. Refer to Group 2, Suspension, for additional information.

Pinion Angle Adjustment at Leaf Springs
Fig. 37 Pinion Angle Adjustment at Leaf Springs

1 - WEDGE

FRONT AXLE PINION INPUT ANGLE

Adjust the front axle pinion input angle at the lower suspension arms with shims (Fig. 38). Adding shims will decrease the pinion shaft angle but will also increase the caster angle. The pinion shaft angle has priority over the caster angle. Refer to Group 2, Suspension, for additional information.

    More about «Adjustments»:

    Rear axle pinion input angle

    Front axle pinion input angle

    Jeep Cherokee Service Manual / Differential and driveline / Propeller shafts / Adjustments / Rear axle pinion input angle

    Jeep Cherokee Service Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com