Toyota
Jeep Cherokee
 Service Manual
Power lock systems » Service procedures
Remote keyless entry transmitter battery replacement

The Remote Keyless Entry (RKE) transmitter case snaps open and shut for battery access. To replace the RKE transmitter batteries: (1) Using a trim stick or another suitable wide flat-bladed tool, gently pry at the center seam of the transmitter case halves near the key ring until the two halves unsnap.

(2) Lift the back half of the transmitter case off of the transmitter.

(3) Remove the two batteries from the transmitter.

(4) Replace the two batteries with new Panasonic CR2016, or their equivalent. Be certain that the batteries are installed with their polarity correctly oriented.

(5) Align the two transmitter case halves with each other, and squeeze them firmly together until they snap back into place.

    More about «Service procedures»:

    Remote keyless entry transmitter battery replacement

    Remote keyless entry transmitter programming

    Remote keyless entry receiver programming

    Jeep Cherokee Service Manual / Power lock systems / Service procedures / Remote keyless entry transmitter battery replacement

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com