Toyota
Jeep Cherokee
 Service Manual
Suspension » Front suspension » Removal and installation
Shock absorber

REMOVAL

  1.  Remove the nut, retainer and grommet from the upper stud in the engine compartment (Fig. 2).
  2.  Remove the lower nuts and bolts from the axle bracket.
  3.  Remove the shock absorber.

INSTALLATION

  1.  Position the lower retainer and grommet on the shock stud. Insert the shock absorber through the shock tower hole.
  2.  Install the lower bolts and nuts. Tighten nuts to 23 N·m (17 ft. lbs.).
  3.  Install the upper grommet and retainer on the stud. Install the nut and tighten to 22 N·m (16 ft. lbs.).
    More about «Removal and installation»:

    Shock absorber

    Coil spring/jounce bumper

    Lower suspension ARM

    Upper suspension ARM

    Front axle bushing

    Stabilizer bar

    Track bar

    Hub bearing

    Wheel mounting studs

    Jeep Cherokee Service Manual / Suspension / Front suspension / Removal and installation / Shock absorber

    Jeep Cherokee Service Manual

    Categories


    © 2017-2023 Copyright www.jcherokee.com