Jeep Cherokee

 Service Manual

Lubrication and maintenance » Lubricants
Specifications

FLUID CAPACITIES FUEL TANK

All . . . . . . . . . . . . . . . . . . . . . . . . 76.4 L (20.2 gal.)

ENGINE OIL W/FILTER CHANGE

2.5L . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 L (4.0 qts.)
4.0L . . . . . . . . . . . . . . . . . . . . . . . . . 5.7 L (6.0 qts.)

COOLING SYSTEM

2.5L . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 L (10 qts.)*
4.0L . . . . . . . . . . . . . . . . . . . . . . . 11.4 L (12 qts.)**

*Includes 2.2 L (2.3 qts) for coolant recovery reservoir.

**Includes 0.9 L (1.0 qt) for coolant recovery reservoir.

AUTOMATIC TRANSMISSION

Dry fill capacity*

AW4 . . . . . . . . . . . . . . . . . . . . . . . . 7.8 L (16.5 pts.)
30RH . . . . . . . . . . . . . . . . . . . . . . . 4.67 L (9.86pts.)

*Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to Group 21, Transmission for proper fluid fill procedure.

MANUAL TRANSMISSION

AX5 (4X2) . . . . . . . . . . . . . . . . . . . . 3.5 L (3.7 qts.)
AX5 (4X4) . . . . . . . . . . . . . . . . . . . . 3.3 L (3.5 qts.)
AX15 (4X2) . . . . . . . . . . . . . . . . . . . 3.15 L (3.3 qts.)
AX15 (4X4) . . . . . . . . . . . . . . . . . . . 3.15 L (3.3 qts.)

TRANSFER CASE

SELEC-TRAC 242 . . . . . . . . . . . . . 1.3 L (2.85 pts.)
COMMAND-TRAC 231 . . . . . . . . . . 1.0 L (2.2 pts.)

FRONT AXLE

181-FBI . . . . . . . . . . . . . . . . . . . . 1.48 L (3.13 pts.)
186-FBI . . . . . . . . . . . . . . . . . . . . . . 1.18L (2.5pts.)

REAR AXLE

194-RBI . . . . . . . . . . . . . . . . . . . . 1.66 L (3.5 pts.*)
8-1/4 . . . . . . . . . . . . . . . . . . . . . . 2.08 L (4.4 pts.**)

* When equipped with TRAC-LOK, include 3.5 ounces of Friction Modifier Additive.

** When equipped with TRAC-LOK, include 4 ounces of Friction Modifier Additive.

POWER STEERING

Power steering fluid capacities are dependent on engine/chassis options as well as steering gear/cooler options. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these capacities may vary.

Refer to Section 19 of the service manual for proper fill and bleed procedures.

Service procedures

Specifications