Toyota
Jeep Cherokee
 Service Manual
Steering » Steering linkage » Removal and installation
Steering damper

REMOVAL

(1) Remove the steering damper retaining bolt from the axle bracket.

(2) Remove the cotter pin and nut from the ball stud at the drag link.

(3) Remove the steering damper ball stud from the drag link with Puller C-3894-A.

INSTALLATION

(1) Install steering damper onto the axle bracket and drag link.

(2) Install steering damper bolt in axle bracket and tighten nut to 75 N·m (55 ft. lbs.).

(3) Install ball stud nut at the drag link and tighten nut to 75 N·m (55 ft. lbs.). Install a new cotter pin.

    More about «Removal and installation»:

    Tie rod

    Pitman ARM

    Drag link

    Steering damper

    Jeep Cherokee Service Manual / Steering / Steering linkage / Removal and installation / Steering damper

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com