Jeep Cherokee Service ManualOverhead console systems » Removal and installation
Sunglasses storage bin
Sunglasses storage bin
The sunglasses storage bin door and bin, housing, damper, spring and latch are serviced only as a unit.
Remove the sunglasses storage bin module from the overhead console as follows: (1) Remove the overhead console from the vehicle.
See Overhead Console in this group for the procedures.
(2) Disengage the overhead console courtesy lamp wire harness from the retainers molded into the sunglasses storage bin housing.
(3) Remove the six screws that secure the sunglasses storage bin module to the overhead console housing (Fig. 6).
Fig. 6 Sunglasses Storage Bin Module Remove/Install
1 - SUNGLASSES STORAGE BIN MODULE
2 - MOUNTING SCREWS
3 - WIRE HARNESS RETAINERS
(4) Remove the sunglasses storage bin module from the overhead console.
(5) Reverse the removal procedures to install.
Tighten the mounting screws to 2.2 N·m (20 in. lbs.).
Overhead console
Trip computer, compass, and thermometer display module
Push button module
Reading and courtesy lamp bulb
Garage door opener storage bin door
Sunglasses storage bin
Ambient temperature sensor
Jeep Cherokee Service Manual
- Lubrication and maintenance
- Suspension
- Differential and driveline
- Brakes
- Clutch
- Cooling system
- Battery
- Starting systems
- Charging system
- Ignition system
- Instrument panel systems
- Audio systems
- Horn systems
- Speed control system
- Turn signal and hazard warning systems
- Wiper and washer systems
- Lamps
- Passive restraint systems
- Electrically heated systems
- Power distribution systems
- Power lock systems
- Vehicle theft/security systems
- Power seat systems
- Power window systems
- Power mirror systems
- Chime/buzzer warning systems
- Overhead console systems
- Engine
- Exhaust system
- Frame and bumpers
- Frame
- Fuel system
- Steering
- Transmission and transfer case
- Tires and wheels
- Body
Categories
