Jeep Cherokee

 Service Manual

Overhead console systems » Removal and installation
Trip computer, compass, and thermometer display module

(1) Remove the overhead console from the vehicle.

See Overhead Console in this group for the procedures.

(2) Remove the two screws that secure the forward end of the trip computer, compass, and thermometer display module to the overhead console housing (Fig.

4).

(3) Gently flex the sides of the overhead console housing as required to release the trip computer, compass, and thermometer display module mounting pins.

(4) Pull the trip computer, compass, and thermometer display module away from the overhead console housing far enough to access the two wire harness connectors.

Fig. 4 Trip Computer, Compass, and Thermometer Display Module Remove/Install

(5) Unplug the overhead console and push button module wire harness connectors from the trip computer, compass, and thermometer display module.

(6) Remove the trip computer, compass, and thermometer display module from the overhead console housing.

(7) Reverse the removal procedures to install.

Tighten the mounting screws to 2.2 N·m (20 in. lbs.).

Overhead console

Trip computer, compass, and thermometer display module

Push button module

Reading and courtesy lamp bulb

Garage door opener storage bin door

Sunglasses storage bin

Ambient temperature sensor