Jeep Cherokee

 Service Manual

Suspension » Front suspension » Removal and installation
Upper suspension ARM

REMOVAL

1.  Raise and support the vehicle.
2.  Remove the upper suspension arm nut and bolt at the axle bracket.
3.  Remove the nut and bolt at the frame rail and remove the upper suspension arm (Fig. 3).

INSTALLATION

1. Position the upper suspension arm at the axle and frame rail.
2.  Install the bolts and finger tighten the nuts.
3.  Remove the supports and lower the vehicle.
4.  Tighten the nut at the axle to 75 N·m (55 ft. lbs.). Tighten the nut at the frame bracket to 90 N·m (66 ft. lbs.).

Shock absorber

Coil spring/jounce bumper

Lower suspension ARM

Upper suspension ARM

Front axle bushing

Stabilizer bar

Track bar

Hub bearing

Wheel mounting studs