Jeep Cherokee (XJ): Frame
Front bumper end cap
REMOVAL
(1) Remove the rivet attaching the end cap to the
air deflector.
(2) Remove the bolts and nuts attaching the end
cap to the bumper (Fig. 1).
(3) Pull back the whe ...
Front skid plate
REMOVAL
(1) Remove the screws that attach skid plate to
side sills.
(2) Remove the nuts that attach the skid plate to
the crossmember (Fig. 1).
(3) Remove the skid plate from ...
Other materials:
Rear door latch striker. Rear door inside handle actuator. Rear door inner belt weatherstrip
Rear door latch striker
REMOVAL
(1) Using a grease pencil or equivalent, mark position
of striker.
(2) Remove screws attaching striker to C-pillar
(Fig. 52).
(3) Separate striker from C-pillar.
INSTALLATION
(1) Position and align striker on C-pillar.
(2) Install screws attaching strike ...