Jeep Cherokee (XJ): General information
An audio system is standard factory-installed
equipment on this model, unless the vehicle is
ordered with an available radio delete option. Refer
to 8W-47 Audio System in Group 8W - Wiring Diagrams
for complete circuit descriptions and diagrams.
NOTE: This group covers both Left-Hand Drive
(LHD) and Right-Hand Drive (RHD) versions of this
model. Whenever required and feasible, the RHD
versions of affected vehicle components have been
constructed as mirror-image of the LHD versions.
While most of the illustrations used in this group
represent only the LHD version, the diagnostic and
service procedures outlined can generally be
applied to either version. Exceptions to this rule
have been clearly identified as LHD or RHD, if a
special illustration or procedure is required. Several combinations of radio receivers and
speaker systems are offered on this model. The standard
equipment audio system includes an AM/FM
(RAL sales code) receiver, and speakers in two locations.
Following are general descriptions of the major
components in the standard and optional factory-installed
audio systems. Refer to the owner's manual in
the vehicle glove box for more information on the features,
use and operation of each of the available
audio systems.Introduction
Audio system
Other materials:
Fitting crankshaft main bearings
INSPECTION
Wipe the inserts clean and inspect for abnormal
wear patterns and for metal or other foreign material
imbedded in the lining. Normal main bearing insert
wear patterns are illustrated (Fig. 34). In general the
lower bearing half will a heaver wear pattern.
NOTE: If any of the crank ...