Jeep Cherokee (XJ): General information
Six-way power seats are an available factory-installed
option for Left-Hand Drive (LHD) versions of
this model. Refer to 8W-63 - Power Seat in Group 8W
- Wiring Diagrams for complete circuit descriptions
and diagrams.
NOTE: This group covers both Left-Hand Drive
(LHD) and Right-Hand Drive (RHD) versions of this
model. Whenever required and feasible, the RHD
versions of affected vehicle components have been
constructed as mirror-image of the LHD versions.
While most of the illustrations used in this group
represent only the LHD version, the diagnostic and
service procedures outlined can generally be
applied to either version. Exceptions to this rule
have been clearly identified as LHD or RHD, if a
special illustration or procedure is required. The power seat system option allows the front
seating positions to be electrically adjusted for optimum
control and comfort using the power seat
switches located on the outboard seat cushion side
shield. The power seat system allows the seating
position to be adjusted forward, rearward, front up,
front down, rear up, or rear down. The power seat
system receives battery current through a fuse in the
Power Distribution Center and a circuit breaker in
the junction block, regardless of the ignition switch
position.
The power seat system includes the power seat
adjuster and motors unit, the power seat switch, and
the circuit breaker. Following are general descriptions
of the major components in the power seat system.
Refer to the owner's manual in the vehicle glove
box for more information on the features, use and
operation of the power seat system.Introduction
Power seat system
Other materials:
Spare Tires
NOTE: For vehicles equipped with Tire Service Kit
instead of a spare tire, please refer to "Tire Service Kit" in
"What To Do In Emergencies" for further information.
CAUTION!
Because of the reduced ground clearance, do not take
your vehicle through an automatic car wash with a
compact or limit ...