Jeep Cherokee (XJ): Lamp systems
REMOVAL AND INSTALLATION
Sentinel headlamp delay module
REMOVAL
(1) Remove the knee blocker.
(2) Remove the screw that attaches the module to the inside of the instrument panel (Fig. 1).
(3) Disconnect the wire harness connector and remove the module from the instrument panel.
Fig. 1 Headlamp Delay Module
1 - BRACKET
2 - HEADLAMP DELAY MODULE
INSTALLATION
(1) Position the module inside the I/P and connect the wire harness connector to the module.
(2) Install the screw that attaches the module to the inside of the instrument panel.
(3) Install the knee blocker.
Daytime running lamp module
REMOVAL
The Daytime Running Lights (DRL) module is located on the right fender inner panel adjacent to the dash panel (Fig. 2).
Fig. 2 Daytime Running Lamp Module
1 - DAYTIME RUNNING LIGHT MODULE
(1) Disconnect the wire harness connector from the module.
(2) Remove the screws that attach the module to the fender inner panel.
(3) Remove the module from the fender inner panel.
INSTALLATION
(1) Position the module on the right fender inner panel.
(2) Install the attaching screws. Tighten the screws securely.
(3) Connect the wire harness connector to the module.
Other materials:
Gearshift mechanism. Converter drainback valve. Brake transmission shift interlock
mechanism
Gearshift mechanism
DESCRIPTION
The shift mechanism is cable operated and provides
six shift positions. The shift indicator is located
on the console next to the gear shift. The shift positions
are:
Park (P)
Reverse (R)
Neutral (N)
Drive (D)
Manual Secon ...