Jeep Cherokee (XJ): Lamps

Previous pageWiper motor. Wiper switch and washer switch. Washer system

Wiper motor FRONT (1) Disconnect and isolate the battery negative cable. (2) Remove the wiper arms from the wiper pivots. See Wiper Arm in this group for the procedures. (3) Remove the eight ...

Next pageLamp systems

DESCRIPTION AND OPERATIONLamp systems Each vehicle is equipped with various lamp assemblies. A good ground is necessary for proper lighting operation. Grounding is provided through a separate gro ...

Other materials:

Gearshift cable. Throttle valve cable. Road testing
Gearshift cable (1) The floor shifter lever and gate positions should be in alignment with all transmission PARK, NEUTRAL, and gear detent positions. (2) Engine starts must be possible with floor shift lever in PARK or NEUTRAL gate positions only. Engine starts must not be possible in any o ...