Jeep Cherokee (KL): Oil Change Reset. DID Selectable Menu Items

Jeep Cherokee (KL) 2014 - 2023 Owners Manual > Understanding your instrument panel > Driver information display (did) > Oil Change Reset. DID Selectable Menu Items

Oil Change Reset

Oil Change Due

Your vehicle is equipped with an engine oil change indicator system. The "Oil Change Due" message will display in the DID for five seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style.

Unless reset, this message will continue to display each time you turn the ignition is cycled to the ON/RUN position. To turn off the message temporarily, push and release the OK button. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure.

Vehicles Equipped With Keyless Enter-N-Go

1. Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (do not start the engine).

2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.

3. Without pushing the brake pedal, push the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position.

Vehicles Not Equipped With Keyless Enter-N-Go

1. Turn the ignition switch to the ON/RUN position (do not start the engine).

2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.

3. Turn the ignition switch to the OFF/LOCK position

NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.

DID Selectable Menu Items

Push and release the UP or DOWN arrow buttons until the desired Selectable Menu item is displayed in the DID.

Follow the Menu or submenu prompts as desired.

Speedometer

Push and release the UP or DOWN arrow button until the Speedometer Menu item is highlighted in the DID.

Push and release the OK button to change the speedometer scale from mph to km/h (or vice versa).

Vehicle Info (Customer Information Features)

Push and release the UP or DOWN arrow button until the Vehicle Info Menu item is highlighted in the DID.

Push and release the RIGHT/LEFT arrow button to cycle through the Vehicle Info sub-menus and follow the prompts on each screen as needed.

1. Tire Pressure

Push and release the UP or DOWN arrow button until "Tire Pressure" is highlighted in the DID. Push and release the RIGHT arrow button and one of the following will be displayed:

  • If tire pressure is OK for all tires a vehicle ICON is displayed with tire pressure values in each corner of the ICON
  • If one or more tires have low pressure, "Inflate Tire To XX" is displayed with the vehicle ICON and the tire pressure values in each corner of the ICON with the pressure value of the low tire displayed in a different color than the other tire pressure value.
  • If the Tire Pressure system requires service, "Service Tire Pressure System" is displayed.
  • Tire PSI is an information only function and cannot be reset. Push and release the LEFT arrow button to return to the main menu.
  • Refer to "Tire Pressure Monitoring System (TPMS)" under "Starting and Operating" for further information.

2. Coolant Temperature

Displays the actual coolant temperature

3. Transmission Temp-Automatic Transmission Only

Displays the actual transmission temperature.

4. Oil Temp

Displays the actual oil temperature.

5. Oil Life

Displays the remaining oil life.

6. Battery Voltage

Displays the actual battery voltage

Driver Assist

Adaptive Cruise Control (ACC) Menu - If Equipped

The DID displays the current ACC system settings. The information displayed depends on ACC system status.

Push the ADAPTIVE CRUISE CONTROL (ACC) ON/ OFF button (located on the steering wheel) until one of the following displays in the DID:

Adaptive Cruise Control Off

When ACC is deactivated, the display will read "Adaptive Cruise Control Off."

Adaptive Cruise Control Ready

When ACC is activated but the vehicle speed setting has not been selected, the display will read "Adaptive Cruise Control Ready." Push and release the SET + or the SET- button (located on the steering wheel) and the following will display in the DID:

ACC SET

When ACC is set, the set speed will display in the instrument cluster.

The ACC screen may display once again if any ACC activity occurs, which may include any of the following:

  • Distance Setting Change
  • System Cancel
  • Driver Override
  • System Off
  • ACC Proximity Warning
  • ACC Unavailable Warning
  • The DID will return to the last display selected after five seconds of no ACC display activity.

For further information, refer to "Adaptive Cruise Control (ACC) - If Equipped" in "Understanding The Features Of Your Vehicle."

LaneSense - If Equipped

The DID displays the current LaneSense system settings.

The information displayed depends on LaneSense system status and the conditions that need to be met. For further information, refer to "LaneSense - If Equipped" in "Understanding The Features Of Your Vehicle."

Fuel Economy

Push and release the UP or DOWN arrow button until the Fuel Economy Menu item is highlighted in the DID.

Push and Hold the OK button to reset feature.

  • Range - The display shows the estimated distance (mi or km that can be traveled with the fuel remaining in the tank. When the Range value is less than 30 miles (48 km) estimated driving distance, the Range display will change to a "LOW FUEL" message. Adding a significant amount of fuel to the vehicle will turn off the "LOW FUEL" message and a new Range value will display. Range cannot be reset through the OK button.

NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the Range displayed value.

  • Average - The display shows the average fuel economy (MPG or L/100 km) since the last reset.
  • Current - This display shows the current fuel economy (MPG or L/100 km) form while driving.

Trip Info

Push and release the UP or DOWN arrow button until the Trip Menu item is highlighted in the DID (Toggle left or right to select Trip A or Trip B). The Trip information will display the following:

  • Distance - Shows the total distance (mi or km) traveled for Trip A or Trip B since the last reset.
  • Average Fuel Economy - Shows the average fuel economy (MPG or L/100 km) of Trip A or Trip B since the last reset.
  • Elapsed Time - Shows the total elapsed time of travel since the last reset.

Hold the OK button to reset feature information.

Stop/Start - If Equipped

Push and release the UP or DOWN arrow button until the Stop/Start icon is highlighted in the DID. Push and release the RIGHT arrow button to display the Stop/ Start status.

Audio

Push and release the UP or DOWN arrow button until the Audio Menu displays in the DID.

Stored Messages

Push and release the UP or DOWN arrow button until the Messages Menu item is highlighted in the DID. This feature shows the number of stored warning messages.

Pushing the RIGHT or LEFT arrow button will allow you to scroll through the stored messages.

Screen Setup

Push and release the UP or DOWN arrow button until the Screen Setup Menu displays in the DID. Push and release the OK button to enter the submenus. The Screen Setup feature allows you to change what information is displayed in the instrument cluster as well as the location that information is displayed.

1. Upper Left

  • Compass
  • Outside Temp. (default)
  • Time
  • Range to Empty
  • Average L/100km (or MPG)
  • Current L/100km (or MPG)
  • Trip A Distance
  • Trip B Distance
  • None

2. Upper Right

  • Compass (default)
  • Outside Temp
  • Time
  • Range to Empty
  • Average L/100km (or MPG)
  • Current L/100km (or MPG)
  • Trip A Distance
  • Trip B Distance
  • None

3. Center

  • Menu Title (default)
  • Compass
  • Outside Temp.
  • Time
  • Range to Empty
  • Average L/100km (or MPG)
  • Current L/100km (or MPG)
  • Trip A Distance
  • Trip B Distance
  • Audio Inform
  • None

4. Gear Display - If Equipped

  • Single
  • Full PRND (default)

5. Defaults

  • Ok
  • Cancel

Speed Warning - If Equipped

Push and release the UP or DOWN arrow button until the Speed Warning Menu icon/ title is highlighted in the DID. Push and release OK to enter speed warning. Use UP or DOWN arrow to select a desired speed, then push and release OK to set the speed. The Manual Speed Assist (MSA) Speed Warning telltale will display in the DID, and a chime will sound with a pop up warning message when the set speed is exceeded.

    Previous pageDriver information display (did)

    The Driver Information Display (DID) features a driverinteractive display that is located in the instrument cluster. Driver Information Display (DID) Location The DID Menu items consist of the ...

    Next pageUconnect settings

    The Uconnect system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel that allow you to access and change the customer prog ...

    Other materials:

    Valve timing. Valve, guide and seal. Piston-fitting
    Valve timing Disconnect the spark plug wires and remove the spark plugs.  Remove the engine cylinder head cover.  Remove the capscrews, bridge and pivot assembly, and rocker arms from above the No.1 cylinder.  Alternately loosen each capscrew, one turn at a time, to avo ...