Jeep Cherokee (XJ): Power mirror systems

Previous pageRemoval and installation

Door module (1) Disconnect and isolate the battery negative cable. (2) Remove the screws that secure the front door trim panel to the inner door panel (Fig. 4). (3) Using a trim stick or anoth ...

Next pageGeneral information

Introduction Power operated or power operated and heated outside rear view mirrors are available factory-installed options on this model. Refer to 8W-62 - Power Mirrors in Group 8W - Wiring Diagram ...

Other materials:

Piston ring-fitting
(1) Carefully clean the carbon from all ring grooves. Oil drain openings in the oil ring groove and pin boss must be clear. DO NOT remove metal from the grooves or lands. This will change ring-to-groove clearances and will damage the ring-to-land seating. (2) Be sure the piston ring grooves a ...