Jeep Cherokee (XJ): Removal and installation

Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Chime/buzzer warning systems > Removal and installation

CHIME WARNING SYSTEM SWITCHES

Service procedures for the various hard-wired switches used in the chime warning system can be found in the proper group as follows:

  •  Driver door jamb switch - refer to Group 8L - Lamps
  •  Driver seat belt switch - refer to Group 23 - Body
  •  Headlamp switch - refer to Group 8E - Instrument Panel Systems
  •  Key-in ignition switch - refer to Group 8D - Ignition Systems.

    Previous pageDiagnosis and testing

    Driver door jamb switch For circuit descriptions and diagrams, refer to 8W-40 - Instrument Cluster or 8W-44 - Interior Lighting in Group 8W - Wiring Diagrams. WARNING: ON VEHICLES EQUIPPED WITH A ...

    Next pageOverhead console systems

    ...

    Other materials:

    Description and operation
    8 1/4 Axle DESCRIPTION The 8 1/4 inch axle housings consist of a cast iron center section with axle tubes extending from either side. The tubes are pressed into and welded to the differential housing to form a one-piece axle housing (Fig. 1). The axles have a vent hose to relieve internal pr ...