Jeep Cherokee (XJ): Removal and installation
Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Transmission and transfer case > Automatic transmission-30RH > Removal and installation
- Transmission
- Torque converter. Yoke seal replacement. Extension housing bushing
- Adapter housing. Speedometer adapter. Park/neutral position switch
- Gearshift cable. Brake transmission shift interlock. Valve body
- Output shaft rear bearing. Governor and park gear. Park lock
Fluid level check
Transmission fluid level should be checked monthly
under normal operation. If the vehicle is used for
trailer towing or similar heavy load hauling, check
fluid level and condition ...
CAUTION: The transmission and torque converter
must be removed as an assembly to avoid component
damage. The converter drive plate, pump bushing, or
oil seal can be damaged if the converter is left ...
Other materials:
Jump-starting procedures
If your vehicle has a discharged battery it can be jumpstarted
using a set of jumper cables and a battery in
another vehicle or by using a portable battery booster
pack. Jump-starting can be dangerous if done improperly
so please follow the procedures in this section carefully.
NOTE: When using ...