Jeep Cherokee (XJ): Removal and installation

Previous pageService procedures

LUBRICANT CHANGE (1) Raise and support the vehicle. (2) Remove the lubricant fill hole plug from the differential housing cover. (3) Remove the differential housing cover and drain the lubric ...

Next pageRear axle. Pinion shaft seal. Collapsible spacer

Rear axle REMOVAL (1) Raise and support the vehicle. (2) Position a suitable lifting device under the axle. (3) Secure axle to device. (4) Remove the wheels and tires. (5) Remove the bra ...

Other materials:

Diagnosis and testing
General information Axle bearing problem conditions are usually caused by:  Insufficient or incorrect lubricant.  Foreign matter/water contamination.  Incorrect bearing preload torque adjustment. Fig. 4 Trac-lokY Limited Slip Differential Operation 1 - CASE 2 - RING ...