Jeep Cherokee (XJ): Specifications

Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Clutch > Specifications

TORQUE

DESCRIPTION TORQUE

Bolts, clutch cover 2.5 L . . . . . . . 31 N·m (23 ft. lbs)
Bolts, clutch cover 4.0 L . . . . . . . 50 N·m (37 ft. lbs)
Bolt/Nut, clutch cyl. mount . . . 23 N·m (200 in. lbs)
Bolt, clutch housing M12 . . . . . . 75 N·m (55 ft. lbs)
Bolt, clutch housing 3/8 . . . . . . . 37 N·m (27 ft. lbs) Bolt, clutch housing 7/16 . . . . . . 58 N·m (43 ft. lbs)
Bolt, clutch housing/trans. . . . . . 46 N·m (34 ft. lbs)
Bolt, dust shield M8 . . . . . . . . . . 8 N·m (72 in. lbs)
Bolt, dust shield lower . . . . . . . . 50 N·m (37 ft. lbs)
Bolt, X-member/frame . . . . . . . . 41 N·m (30 ft. lbs)
Bolt, X-member/rear support . . . 45 N·m (33 ft. lbs.)
Bolts, flywheel 4.0 L . . . . . . . . 142 N·m (105 ft. lbs)
Bolts, flywheel 2.5 L . . . . . . . . . 95 N·m (70 ft. lbs)
Bolt, starter motor . . . . . . . . . . . 45 N·m (33 ft. lbs)
Bolts, U-joints . . . . . . . . . . . . . 19 N·m (170 in. lbs.)

    Previous pageRemoval and installation

    Clutch cover and disc REMOVAL (1) Remove transmission. Refer to procedures in Group 21. (2) If original clutch cover will be reinstalled, mark position of cover on flywheel for assembly referenc ...

    Next pageCooling system

    ...

    Other materials:

    Hub bearing and axle shaft. Steering knuckle and ball studs. Differential
    Hub bearing and axle shaft If the axle shaft and hub bearing are being removed in order to service another component, the axle shaft and hub bearing can be removed as an assembly. REMOVAL  Raise and support the vehicle.  Remove the wheel and tire assembly.  Remove the brak ...