Jeep Cherokee (XJ): Specifications

Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Charging system > Specifications

Generator ratings

Generator ratings

Torque chart

TORQUE CHART

Right Hand Drive= RHD, Left Hand Drive= LHD.

Description Torque

Generator Mounting Bolt-LHD-2.5L/4.0L
Engine . . . . . . . . . . . . . . . . . . 55 N·m (41 ft. lbs.)
Generator Pivot Bolt/Nut-LHD-2.5L/4.0L
Engine . . . . . . . . . . . . . . . . . . 55 N·m (41 ft. lbs.)
Battery Terminal Nut-LHD or
RHD . . . . . . . . . . . . . . . . . . 8.5 N·m (75 in. lbs.)

Description Torque

Ground Terminal Nut-LHD or
RHD . . . . . . . . . . . . . . . . . . 8.5 N·m (75 in. lbs.)
Harness Hold-down Nut-LHD or
RHD . . . . . . . . . . . . . . . . . . 8.5 N·m (75 in. lbs.)
Field Terminal Nuts-LHD or
RHD . . . . . . . . . . . . . . . . . . 2.8 N·m (25 in. lbs.)

    Previous pageRemoval and installation

    Generator REMOVAL WARNING: DISCONNECT NEGATIVE CABLE FROM BATTERY BEFORE REMOVING BATTERY OUTPUT WIRE (B+ WIRE) FROM GENERATOR. FAILURE TO DO SO CAN RESULT IN INJURY OR DAMAGE TO ELECTRICAL SYSTE ...

    Next pageIgnition system

    ...

    Other materials:

    Specifications
    Frame dimensions Frame dimensions are listed in millimeter scale. All dimensions are from center to center of Principal Locating Point (PLP), or from center to center of PLP and fastener location (Fig. 6). Fig. 6 Frame DimensionsFrame torque specifications DESCRIPTION TORQUE Front Skid Pl ...