Jeep Cherokee (XJ): Specifications. Special tools

Specifications

TORQUE

DESCRIPTION TORQUE

Plugs, Access . . . . . . . . . . . . . . . 19 N·m (14 ft.lbs.)
Bolts, Adapter Housing . . . . . . . 34 N·m (25 ft.lbs.)
Switch, Back-up Light . . . . . . . 44 N·m (32.5 ft.lbs.)
Plugs, Drain and Fill . . . . . . . . 44 N·m (32.5 ft.lbs.)
Bolts, Front Bearing Retainer . . 17 N·m (12 ft.lbs.)
Plugs, Interlock and Detent . . . . 19 N·m (14 ft.lbs.)
Screws, Propeller Shaft Clamp . . . . . . . 16-23 N·m (140-200 in.lbs.)
Bolts, Rear Mount to Transmission . . . . 33-60 N·m (24-44 ft.lbs.)
Nut, Rear Mount Clevis . . 54-75 N·m (40-55 ft.lbs.)
Nuts, Rear Mount to Crossmember . . . . 41-68 N·m (30-50 ft.lbs.)
Pins, Restrictor . . . . . . . . . . . . 27.4 N·m (20 ft.lbs.)
Bolts, Reverse Shift Arm Bracket . . . . . . . . 18 N·m (13 ft.lbs.)
Screw, Shift Arm Set . . . . . . . . . 38 N·m (28 ft.lbs.)
Screws, Shift Fork Set . . . . . . . . 20 N·m (15 ft.lbs.)
Nut, Shift Knob . . . . . . . . 20-34 N·m (15-25 ft.lbs.)
Screws, Shifter Floor Cover . . . . . . . . . . . . 2-3 N·m (17-30 in.lbs.)
Bolts, Shift Tower . . . . . . . . . . . . 18 N·m (13 ft.lbs.)
Nuts, Transfer Case Mounting . . . . . . . 30-41 N·m (22-30 ft.lbs.)

Special tools

AX5

Special toolsSpecial tools

AX5

    Previous pageCleaning and inspection

    AX5 MANUAL TRANSMISSION COMPONENTS GENERAL INFORMATION Clean the transmission components in solvent. Dry the cases, gears, shift mechanism and shafts with compressed air. Dry the bearings with cle ...

    Other materials:

    Lamp systems
    REMOVAL AND INSTALLATIONSentinel headlamp delay module REMOVAL (1) Remove the knee blocker. (2) Remove the screw that attaches the module to the inside of the instrument panel (Fig. 1). (3) Disconnect the wire harness connector and remove the module from the instrument panel. Fig. 1 He ...