Jeep Cherokee (KL): Towing Tips

Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic.

Automatic Transmission

The DRIVE range can be selected when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing. However, if frequent shifting does occur while in DRIVE, use the Electronic Range Select (ERS) shift control to select a lower gear range.

NOTE: Using a lower gear range while operating the vehicle under heavy loading conditions will improve performance and extend transmission life by reducing excessive shifting and heat build up. This action will also provide better engine braking.

Electronic Speed Control - If Equipped

  • Do not use in hilly terrain or with heavy loads.
  • When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
  • Use speed control in flat terrain and with light loads to maximize fuel efficiency.

Cooling System

To reduce potential for engine and transmission overheating, take the following actions:

City Driving

When stopped for short periods of time, shift the transmission into NEUTRAL and increase engine idle speed.

Highway Driving

Reduce speed.

Air Conditioning

Turn off temporarily.

    Previous pageTrailer Hitch Classification. Trailer And Tongue Weight. Towing Requirements

    Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the ...

    Other materials:

    Diagnosis and testing
    EXHAUST SYSTEM EXHAUST SYSTEM DIAGNOSIS CHART CONDITION POSSIBLE CAUSE CORRECTION EXCESSIVE EXHAUST NOISE OR LEAKING EXHAUST GASES Leaks at pipe joints.  Rusted or blown out muffler.  Broken or rusted out exhaust pipe. &n ...