Jeep Cherokee (KL): Warning and indicator lights

IMPORTANT: The warning / indicator light switches on in the instrument panel together with a dedicated message and/or acoustic signal when applicable. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to the information contained in the Owner Manual, which you are advised to read carefully in all cases.

Always refer to the information in this chapter in the event of a failure indication.

All active telltales will display first if applicable. The system check menu may appear different based upon equipment options and current vehicle status. Some telltales are optional and may not appear.

Previous pageInstrument cluster - premium

Premium DID Instrument Cluster 1. Tachometer Indicates the engine speed in revolutions per minute (RPM x 1000). 2. Driver Information Display (DID) When the appropriate conditions ex ...

Next pageRed Telltale Indicator Lights

Seat Belt Reminder Warning Light Red Telltale Light What It Means Seat Belt Reminder Warning LightWhen the ignition switch is first turned to ON/RUN, this light will tur ...

Other materials:

If your engine overheats
In any of the following situations, you can reduce the potential for overheating your engine by taking the appropriate action. On the highways - slow down. In city traffic - while stopped, put transmission in NEUTRAL, but do not increase engine idle speed. Caution! Driving with a hot c ...