Toyota
Jeep Cherokee
 Owners Manual
Maintaining your vehicle » Maintenance procedures
Adding Washer Fluid

The windshield and rear window washers share the same fluid reservoir. The fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water.

When refilling the washer fluid reservoir, take some washer fluid and apply it to a cloth or towel and wipe clean the wiper blades, this will help blade performance.

To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers.

WARNING!

Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution.

    More about «Maintenance procedures»:

    Engine Oil

    Engine Oil Filter

    Engine Air Cleaner Filter

    Accessory Drive Belt Inspection

    Maintenance-Free Battery

    Air Conditioner Maintenance

    Body Lubrication

    Windshield Wiper Blades

    Adding Washer Fluid

    Exhaust System

    Cooling System

    Brake System

    Automatic Transmission

    Appearance Care And Protection From Corrosion

    Jeep Cherokee Owners Manual / Maintaining your vehicle / Maintenance procedures / Adding Washer Fluid

    Jeep Cherokee Owners Manual

    Categories


    © 2017-2024 Copyright www.jcherokee.com