Jeep Cherokee (XJ): Power mirror systems

Previous pageRemoval and installation

Door module (1) Disconnect and isolate the battery negative cable. (2) Remove the screws that secure the front door trim panel to the inner door panel (Fig. 4). (3) Using a trim stick or anoth ...

Next pageGeneral information

Introduction Power operated or power operated and heated outside rear view mirrors are available factory-installed options on this model. Refer to 8W-62 - Power Mirrors in Group 8W - Wiring Diagram ...

Other materials:

Form-in-place gaskets. Engine performance. Honing cylinder bores
Form-in-place gaskets There are several places where form-in-place gaskets are used on the engine. DO NOT use form-inplace gasket material unless specified. Care must be taken when applying form-in-place gaskets. Bead size, continuity and location are of great importance. Too thin a bead ca ...