Jeep Cherokee (XJ): Power window systems

Previous pageRemoval and installation

Power seat switch (1) Disconnect and isolate the battery negative cable. (2) Remove the three screws that secure the seat cushion side shield to the outboard seat cushion frame. (3) Pull the ...

Next pageGeneral information

Introduction Power windows are available as factory-installed optional equipment on this model. The power lock system and power mirror system are included on vehicles equipped with the power window ...

Other materials:

Rear axle. Pinion shaft seal. Collapsible spacer
Rear axle REMOVAL (1) Raise and support the vehicle. (2) Position a suitable lifting device under the axle. (3) Secure axle to device. (4) Remove the wheels and tires. (5) Remove the brake drums from the axle. Refer to Group 5, Brakes, for proper procedures. (6) Disconnect parking ...