Jeep Cherokee (XJ): Turn signal and hazard warning systems

Jeep Cherokee (XJ) 1984 - 2001 Service Manual > Turn signal and hazard warning systems

Previous pageSpecifications

TORQUE CHART Description Torque Servo Mounting Bracket-to-Servo Nuts . . . 8.5 N·m (75 in. lbs.) Servo Mounting Bracket-to-Body Bolts . . . . . 2 N·m (20 in. lbs.) Speed Control Switch Mountin ...

Next pageDescription and operation

Turn signal system DESCRIPTION A turn signal system is standard factory-installed safety equipment on this model. The turn signal system uses ignition switched battery current, and will operate on ...

Other materials:

Hood release cable. Hood safety latch. Safety latch striker
Hood release cable REMOVAL (1) Drill out bellcrank to hood rivet heads and remove rivets (Fig. 6). (2) Disconnect bellcrank from latch rod and hood release cable. Remove bellcrank from hood. (3) Disconnect hood release cable from clips on hood. (4) Remove left cowl side trim panel. ( ...