Toyota
Jeep Cherokee
 Service Manual
Overhead console systems » Removal and installation
Ambient temperature sensor

(1) Disconnect and isolate the battery negative cable.

(2) Locate the ambient temperature sensor, below the grille and behind the front bumper on the radiator support crossmember (Fig. 7).

(3) Unplug the ambient temperature sensor wire harness connector.

(4) Remove the screw that secures the ambient temperature sensor to the radiator support crossmember.

(5) Remove the ambient temperature sensor from the vehicle.

Fig. 7 Ambient Temperature Sensor Remove/Install
Fig. 7 Ambient Temperature Sensor Remove/Install

1 - WIRE HARNESS
2 - SCREW
3 - SENSOR
4 - RADIATOR SUPPORT CROSSMEMBER
5 - CLIPS
6 - HORN

(6) Reverse the removal procedures to install.

Tighten the ambient temperature sensor mounting screw to 3.4 N·m (30 in. lbs.).

    More about «Removal and installation»:

    Overhead console

    Trip computer, compass, and thermometer display module

    Push button module

    Reading and courtesy lamp bulb

    Garage door opener storage bin door

    Sunglasses storage bin

    Ambient temperature sensor

    Jeep Cherokee Service Manual / Overhead console systems / Removal and installation / Ambient temperature sensor

    Jeep Cherokee Service Manual

    Categories


    © 2017-2022 Copyright www.jcherokee.com